Skip to main content
BDM-030 (Gen 3) Compatibility Guide

Back Remap Paddles for PlayStation 5 DualSense (BDM-030 (Gen 3))

Verified hardware compatibility guide and parts catalog. Upgrading your PlayStation 5 DualSense with back remap paddles on the BDM-030 (Gen 3) motherboard architecture.

Motherboard Revision Specifications: BDM-030 (Gen 3)

Third generation (common on newer consoles). Look for a 'B' after the model number. Features redesigned smaller adaptive trigger motor housings and a completely different ribbon pinout.

Key Hardware Characteristics:

  • Redesigned trigger housings
  • Incompatible BDM-010/020 ribbons
  • Changed mainboard mounting screws
Compatibility Guarantee: All 1 components listed below have been verified for direct mechanical and electrical compatibility with BDM-030 (Gen 3) motherboards.
Motherboard Compatibility Filter

Select Motherboard Revision

Internal ribbon pinouts and trigger brackets change with each revision. Select your board version below or plug in via USB for instant hardware detection.

Filter Parts by Revision:
Current Filter: BDM-030 (Gen 3)
Showing all verified compatible upgrade kits

Back Remap Paddles

Adds 2 or 4 ergonomic remappable tactile buttons/paddles to the back shell for competitive jumping, sliding, and weapon swapping without lifting thumbs.

2 parts verified
eXtremeRate

eXtremeRate RISE4 Max Remap Kit (BDM-030 / BDM-040)

Est. $38 - $46
Difficulty: Moderate (1-2 hrs) Soldering Optional
  • Dedicated FPC flex cable for BDM-030 and BDM-040 pinouts
  • 4 Remappable back buttons with tactile microswitches
  • Solderless installation for standard button remapping
  • Includes redesigned interior latching bracket
Guaranteed Motherboard Fit:
bdm-030 bdm-040
View Installation & Specs

Frequently Asked Questions

Are these back remap paddles guaranteed to fit my BDM-030 (Gen 3) controller?

Yes. Every part featured on this page has been verified to match the specific circuit traces, ribbon cable pitch, and internal housing brackets of the BDM-030 (Gen 3) revision.

How do I confirm my controller is definitely a BDM-030 (Gen 3)?

Third generation (common on newer consoles). Look for a 'B' after the model number. Features redesigned smaller adaptive trigger motor housings and a completely different ribbon pinout. You can also connect your controller via USB to run the WebHID auto-detector above.

What tools do I need to install back remap paddles on a BDM-030 (Gen 3)?

Most kits require a PH00 Phillips screwdriver, plastic prying pry tools, and tweezers. If installing Hall Effect joysticks, a soldering iron, desoldering pump/wick, and solder flux are also required.