PlayStation 5 DualSense Mod Builder
Sony silently iterates internal DualSense motherboards across 4 generations (BDM-010 through BDM-040). Ribbon pinouts, trigger latches, and shell clips vary dramatically.
Select Motherboard Revision
Internal ribbon pinouts and trigger brackets change with each revision. Select your board version below or plug in via USB for instant hardware detection.
Motherboard Identification Guide
Check back label & internal trigger housingFirst-generation launch model. Model CFI-ZCT1W without a letter suffix. FCC ID ends in no letter. Features large trigger torsion springs and standard 23-pin main ribbon.
- Thick trigger torsion springs
- 23-pin main ribbon
- Standard black plastic mid-frame
Second generation. Look for an 'A' after the model CFI-ZCT1W and FCC ID ending in 'A'. Features smaller trigger torsion springs and updated microphone cable.
- Smaller trigger springs
- Revised touchpad bracket
- Updated mic ribbon
Third generation (common on newer consoles). Look for a 'B' after the model number. Features redesigned smaller adaptive trigger motor housings and a completely different ribbon pinout.
- Redesigned trigger housings
- Incompatible BDM-010/020 ribbons
- Changed mainboard mounting screws
Fourth generation. Look for a 'C' suffix. Shares ribbon compatibility with BDM-030 but has a revised power management IC.
- Shares BDM-030 ribbon pinout
- New power plane
- Updated L1/R1 tactile switches
Hall Effect Joysticks
Electromagnetic replacement joysticks that use contactless magnetic sensors. Immune to mechanical potentiometer carbon wear and stick drift.
GuliKit TMR / Hall Effect Electromagnetic Joystick Kit
- Universal 14-pin potentiometer footprint (compatible across all BDM boards)
- Contactless magnetic Hall sensor eliminates carbon wiper friction
- Permanent zero-drift lifespan rated for 10M+ cycles
- Includes calibration flex boards for precision zero-point centration
Back Remap Paddles
Adds 2 or 4 ergonomic remappable tactile buttons/paddles to the back shell for competitive jumping, sliding, and weapon swapping without lifting thumbs.
eXtremeRate RISE4 Max Remap Kit (BDM-010 / BDM-020)
- 4 Ergonomic metal/polymer back paddles
- 15 buttons remappable on-the-fly (X, O, Triangle, Square, D-pad, L1, R1, L2, R2)
- No soldering required for face buttons (soldering only needed for L3/R3 and touchpad)
- Precision molded textured back shell included
eXtremeRate RISE4 Max Remap Kit (BDM-030 / BDM-040)
- Dedicated FPC flex cable for BDM-030 and BDM-040 pinouts
- 4 Remappable back buttons with tactile microswitches
- Solderless installation for standard button remapping
- Includes redesigned interior latching bracket
Clicky Hair Triggers
Converts long analog trigger pulls into instant 0.5mm - 1.5mm mouse-click tactile switches for ultra-fast weapon fire in competitive FPS games.
eXtremeRate Micro Switch Clicky Hair Trigger Kit (BDM-010 / 020)
- 0.5mm mouse-click trigger travel distance for rapid fire
- Custom molded bracket for BDM-010/020 trigger springs
- 100% Solderless plug-and-play installation
- Reduces trigger fatigue in Warzone, Apex, and Fortnite
eXtremeRate Micro Switch Clicky Hair Trigger Kit (BDM-030)
- Specifically engineered for BDM-030 smaller adaptive trigger assemblies
- Instant tactile switch response with audible click
- Direct drop-in replacement for internal L2/R2 dampers
- No soldering required
Custom Shells & Grips
Ergonomic textured, rubberized, or custom-aesthetic replacement shells and faceplates designed for exact chassis contours.
eXtremeRate Soft Touch Custom Front & Back Shell Kit
- Anti-slip velvet soft-touch ergonomic matte finish
- Includes opening prying tool and screwdriver
- Exact OEM fit with zero panel gaps
- Available in Chameleon, Wood Grain, and Carbon Fiber finishes
Popular Long-Tail Compatibility Guides
Explore deep technical breakdowns and verified parts guides for specific board revisions:
Frequently Asked Questions
How do I know which motherboard revision my PlayStation 5 DualSense has?
You can either connect your controller via USB and click the 'Auto-Detect via USB (WebHID)' button above, or check the model number and FCC ID printed on the back label. For PS5 controllers, BDM-010 has no letter suffix, BDM-020 ends in 'A', BDM-030 ends in 'B', and BDM-040 ends in 'C'.
Can I install Hall Effect sticks on any PlayStation 5 DualSense motherboard?
Yes, Hall Effect joystick modules use the standard 14-pin potentiometer pinout which is mechanically compatible across all motherboard generations. However, desoldering and installing Hall Effect sticks requires precision soldering and calibration boards to center the zero-point.
What happens if I install a BDM-010 back paddle kit on a BDM-030 controller?
The ribbon cable will not fit into the motherboard connector. The main flex board connector on BDM-030 controllers is narrower and uses a different pin configuration. Trying to force it will tear the ribbon or damage the motherboard.