Fortnite to Valorant Sensitivity Converter
Maintain your exact muscle memory when switching from Fortnite to Valorant. Calculates exact sensitivity values, 360-degree rotation distance, and hardware eDPI.
360° Sensitivity & Distance Math Engine
Convert mouse & controller sensitivity with 100% 1:1 cm/360° motor memory match.
Calculated distance for a full 360-degree rotation.
Sensitivity Conversion & Motor Memory Guide
Fortnite and Valorant mechanics, before you convert
Fortnite applies mouse sensitivity through a single slider backed by an engine yaw of 0.005555 (at FOV 80) — and its aim-assist and bloom mean the raw sens number matters less than your cm/360° for tracking, so convert by distance, not by slider value.
Valorant uses a 0.07 yaw at 103 FOV and a fixed 0.9 ADS multiplier on all scoped optics, which makes it one of the least forgiving games for raw number transfer — a small cm/360° mismatch is immediately visible on long-range duels.
Going from Fortnite to Valorant is the sharpest mechanical culture shock in the set: Fortnite tolerates a wide, bloom-driven hipfire while Valorant demands surgical pre-aim on static angles, so the same cm/360° that felt fluid in builds will feel sluggish holding a corner. Convert strictly by distance, then drop your Valorant sens by a touch for long-range duels only if the converted value still feels heavy on the operator. Valorant's fixed 0.9 ADS multiplier also means your scoped shots inherit the hipfire conversion automatically — there is no per-sight tuning to do, unlike in CS2.
The Fortnite → Valorant yaw ratio
Fortnite uses a yaw value of 0.0056 (default FOV 80) while Valorant uses 0.0700 (default FOV 103). That is a 12.6x engine-level difference — direct numerical sensitivity numbers are non-transferable. The converter below divides your Fortnite value by this ratio (then adjusts for FOV) so your 360-degree turn distance stays identical.
What is cm/360° distance?
It is the physical distance (in centimeters or inches) your hand must move across the mousepad to rotate your in-game camera 360 degrees. Matching cm/360° distance ensures 1:1 muscle memory transfer — this is what the 12.6x multiplier above is designed to preserve.
Fortnite vs Valorant: which game needs more fine aim?
Fortnite's default FOV of 80 degrees and Valorant's 103 degrees change how the same cm/360° feels: lower FOV magnifies targets, higher FOV widens tracking arcs. After converting, spend 10 minutes in Valorant's aim range verifying micro-flicks, because muscle memory transfers by distance, not by pixels on screen.
Why does sensitivity differ between Fortnite and Valorant?
Different game engines use different Yaw multipliers (the angular degree change per mouse counts or analog stick tick). Fortnite at 0.0056 and Valorant at 0.0700 do not share a scale, which is why the 12.6x conversion factor exists.
Your Fortnite → Valorant migration checklist
- Enter your current Fortnite sensitivity and hardware DPI in the converter above.
- Copy the Valorant value the engine returns — it applies the 12.6x yaw ratio to preserve your cm/360° distance.
- Paste it into Valorant's settings and keep your FOV near its default of 103° so the conversion assumption holds.
- Warm up in Valorant for 10–15 minutes and verify a full 360° flick lands where it did in Fortnite before you queue competitively.
If a 360° flick overshoots or undershoots after switching, your effective FOV differs from the default used here — raise or lower your Valorant sens in small steps until the visualizer shows your old turn distance.